Write1Wire

Online Development Notebook > Index > ODN > USBm DLL Programming > Device Commands > Write1Wire

Write1Wire

VERSION 1.30+ of the firmware, VERSION 36+ of the DLL

Description:

This is a USBm.dll function to send a 1-wire (MicroLAN) byte write on the previously selected port pin.

Command Syntax: (USBm.dll)

USBm_Write1Wire(device, data )

The USBm_Write1Wire function syntax has these parts:

Part	Description
device	A zero-based index to address the appropriate USB device.
data	Byte to write to bus.

Remarks:

This command does not set the port direction pins or select the pin to use as the 1-wire bus - it is the Reset1Wire command that does this.

VB Declaration

Public Declare Function USBm_Write1Wire _
    Lib "USBm.dll" _
        (ByVal device As Byte, _
               ByVal data As Byte)_
As Integer

VB Example

USBm_Write1Wire 3, 9

This code fragment addresses U4x1 device #3, and writes the value of 9 on the 1-wire bus (line to use previously selected by the Reset1Wire command).

C Prototype

int USBm_Write1Wire (unsigned char device, unsigned char data);

C Example

USBm_Write1Wire ( 3, 9 );

This code fragment addresses U4x1 device #3, and writes the value of 9 on the 1-wire bus (line to use previously selected by the Reset1Wire command).

Hardware: U401 USB Interface U421 USB Interface

Programming: USBm DLL Programming Download Files

Application Notes: U4x1 Application Notes Misc Applications and Information FAQ